Pointers For A Much Safer Home Electrical Installation

Pointers For A Much Safer Home Electrical Installation

When doing Home electrical installation, safety precaution is paramount. Electricity can be hazardous and could result in serious injuries or death if not handled properly. So, no matter the situation, you cannot compromise your safety and that of your home.  

Fortunately, there are several ground rules of electrical installation. When you follow these rules properly, your safety will be a guarantee. In this guide, we are going to look at some of the rules you should observe when doing home electrical installation

Avoid Water 

One of the cardinal rules when it comes to home electrical installation is to avoid water. Water is one of the substances that increases the conductive of electric current. That is why it is recommended that you always avoid working on an electricity project with a wet hand. You must ensure that you are not working in wet areas. In addition to that, your clothes or apron shouldn’t be wet when working on electricity. Therefore, don’t try to repair an electrical circuit, equipment or devices with wet hands. 

Turn Off Main Breaker 

If you have an electrical problem you want to fix, you must always start with turning off the breaker. It is risky to work on an electrical problem when the current is still flowing. There is a likelihood that another person might turn on the appliance when you are fixing it. That’s why you need to turn off the breaker at the panel. Make sure that you have also locked the panel so that another person doesn’t turn it on. 

Always Use Insulated Tools 

All tools used for electrical projects must have an insulation layer. That’s something everyone handling electricity must keep in mind. Sometimes, you will be required to work on an energised circuit when fixing a minor circuit. In such cases, you need to enhance your safety by working with insulated tools. The insulation layer prevents that flow of the electric current to your body. It’s an essential safety tip. 

Recognise Potential Electrical Hazard 

When you have energised circuits and appliances in the house, then you have many potential electrical hazards around you. One of the biggest potential hazards is energised electrical circuits in the house. Check for frayed or worn cords in the house. It’s a common problem that could cause severe damages. If your breaker has been tripping regularly, check what’s causing it. Similarly, if an appliance is not working appropriately, it should be checked for electrical problems. All of these are potential electrical hazards in our homes. 

electrician wearing safety gear while at work

Wear Safety Gear 

When fixing home electrical installation problems, you must put on your safety gear. Two things are very important to wear. One of them is insulated rubber gloves. When dealing with energised circuits, you are likely to come into contact with a live wire. These gloves help protect you from an electric shock. The other safety gear you must have is the goggles. They protect eyes from particles that could injure them. Sometimes, the light produced by electrical short circuits is not good for the eyes. 

Avoid Metallic Ladder 

This is one of the common mistakes that electricians make when fixing electrical problems. You must NEVER use aluminium or steel ladder when working on a receptacle at height. If the circuit is energised, the electric surge will ground you. This means the whole current will pass through your body to the ground. So, you will be electrocuted, and in a worst-case scenario, you could die. That’s why bamboo, fibreglass or wooden ladders the recommended for electrical projects. 

Know Wire Codes 

The other important thing you need to know is the wire code in your country. This is a very important factor when it comes to installation work. It is only through the colour code that you will be able to identify the active wire, which essential for safe electrical installation. For the Australian wire code, the active wire is brown, neutral blue, and earth wire striped green and yellow. With this information, you will be safer. 

Poor Equipment Connection 

You must always ensure proper installation of equipment to ensure your home safety. Frayed cords are common but very dangerous when left unattended. If you have your appliance cable frayed, you must fix the problem immediately. Other electrical hazards common with appliances include damaged insulation and broken plugs. All these are problems that you need to fix to ensure your home safety. 

These are just some of the things you need to do for safer home electrical installation. Make sure that you have the right gear and the right tools to handle electrical projects. With these tips, your safety and that of your home will be a guarantee.